Dry ice blaster IB 7/40 Advanced (240V)

Compact ice blaster for safe, mess-free blasting.

The compact IB 7/40 ice blasting machine offers many of the benefits of the larger IB 15/120 machine but can run from a much smaller compressed air supply, therefore making it ideal for use with in-house compressed air systems. Kärcher’s dry ice blasting technology is a non aggressive but thorough method of cleaning tools, moulds, surfaces and machines with a minimum of downtime. The dry ice pellets are injected into a jet of compressed air, accelerated to speeds in excess of 150 m/s and the fired at the surface to be cleaned. The abrupt cooling of the surface causes a thermal shock and produces fine cracks in the top layer. The dry ice penetrates these cracks, lifts the contaminant from the surface and returns to the atmosphere as CO2 gas leaving only the contaminant behind. Ice blasting uses no chemicals, leaves no wastewater, is environmentally friendly and can be used in areas where cleaning with water is prohibited or inconvenient.

Features and benefits
Dry ice blaster IB 7/40 Advanced (240V): Clear display
Clear display
Clear indication of adjusted values; easy operation thanks to large buttons and electronic control.
Dry ice blaster IB 7/40 Advanced (240V): Automatic residual ice emptying
Automatic residual ice emptying
Residual ice tank emptying at the push of button prevents the machine from freezing up on completion of work.
Dry ice blaster IB 7/40 Advanced (240V): With integrated oil and water separator
With integrated oil and water separator
No icing up of the device.
Integrated ground strap coil
  • Easy earthing of the jet object.
  • Protection against flash-over from the user to the object.
  • Improved jet comfort.
Efficient air flow in the machine
  • The dry ice is transported from the machine to the nozzle without damaging it.
  • Maximum cleaning performance with the nozzle.
Outstanding mobility
  • Optimum machine balancing for manoeuvring over uneven ground comfortably.
  • Handles at the front and rear of the machine make it easy to carry on stairs.
GRP dry ice container
  • Optimum isolation of the dry ice.
  • No condensation formation.
  • The machine does not freeze.
Sophisticated trigger gun holder
  • The trigger gun is always stored securely.
  • Ideal positioning (for removing the nozzles, for example).
Integrated storage compartment for nozzles and tools
  • Everything is easily accessible directly from the machine.
Specifications

Technical data

Power rating (kW) 0.6
Compressed-air connection Claw Coupling (DIN3238)
Housing/Frame Stainless steel (1.4301)
Cable length (m) 7
Air pressure (bar/MPa) 2 - 10 / 0.2 - 1
Quality of air Dry & oil-free
Air flow (m³/min) 0.5 - 3.5
Sound pressure level (dB(A)) 99
Dry ice capacity (kg) 15
Dry ice pellets (diameter) (mm) 3
Dry ice consumption (kg/h) 15 - 50
Number of current phases (Ph) 1
Frequency (Hz) 50 - 60
Voltage (V) 220 - 240
Weight without accessories (kg) 78
Weight (with accessories) (kg) 81.6
Dimensions (L × W × H) (mm) 768 x 510 x 1096

Scope of supply

  • Grease for nozzle threads
  • Flat jet nozzle
  • Flat wrench (for nozzle change): 2 Piece(s)
  • Blasting hose with electrical control wire and quick couplers
  • Blasting gun (ergonomic & save)
  • Tool bag

Equipment

  • Dry Ice output is adjustable directly on the blasting gun
  • Air Pressure is adjustable directly on the blasting gun
  • Switch for "air only" or "ice and air"
  • Electronic control
  • With integrated earth wire rewinder
  • Oil and water separator
Videos
Application areas
  • Cleaning of moulds and casting tools
  • Deburring of plastic parts
  • Cleaning of forging tools
  • Cleaning of bottling plants and mixing plants
  • Cleaning of conveyor, transport and handling systems
  • Cleaning of ovens
  • Cleaning of printing presses and their surrounds
  • Cleaning of wood processing machines
  • Cleaning of generators, turbines, switch cabinets and heat exchangers
Accessories