Microfiber mop, short fibre, abrasive

For deep cleaning and heavy dirt: The abrasive microfibre mop in the classic pocket version with polyamide fibres and polypropylene bristles.

The "Microfibre mop, short fibres, abrasive" cloth in the classic pocket version for universal applications. The fine microfibres and the abrasive strips made of polyamide fibres and robust polypropylene bristles also remove stubborn dirt effectively and have well-balanced, effortless sliding properties. In addition, the cloth has sewn corners and a total of 4 loops in the colours blue, red, yellow and green. With this colour-coded system the cloth can be clearly assigned to a certain part to be cleaned and cross-contamination is effectively prevented – the loops that are not required are simply cut off. The microfibre mop is suitable both for use in the flat mop system with double bucket trolley or single bucket trolley and press as well as for preconditioned applications. Pour 180 percent of the cleaning fleet of the dead weight over the mop cloth. A second step for dry wiping of the area is generally not necessary for both methods.

Specifications

Technical data

Programme ADVANCED
Floor type Hard floors / Resilient floors
Floor structure Smooth and lightly structured
Dirt level High
Textile usage Reusable textiles
Working width (cm) 40
Textile attachment Pockets
Material 56% PET / 14% PA / 30% PP
Textile material microfibre
Manufacturing type Pile knitted fabric (Cleaning layer)
Textile structure Loop pile
Washing temperature (°C) max. 90
Washing recommendation (°C) 60
Dryer temperature (°C) max. 60
Wash cycles* approx. 300
Quantity (piece(s)) 1
Packaging unit (piece(s)) 25
Weight per product / Weight per m² (g/g/m²) 122 / 730
Dimensions (L × W) (mm) 460 x 145

*Compliance with or use of recommended temperatures and detergents. In addition, the use of a dryer, especially at higher temperatures, may reduce the life considerably.

Application areas
  • Floor - wet cleaning
  • Floor washroom - wet cleaning