Short-fibre microfibre mop, light

The microfibre mop with cut pile loops in classic pocket version is ideal for use with the bucket or spray method. 

The short-fibre microfibre mop impresses with its fine microfibres and effective dust,dirt and moisture absorption with single-stage wiping on smooth and lightly textured floors. The mop does not have an absorbent layer and the bucket or spray-cleaning methods are therefore recommended. The well-balanced sliding properties of the mop cover enable longer, fatigue-free work assignments. The sewn corners and four loops in blue, red, yellow and green mean the mop cover can be clearly assigned to a specific area to be cleaned and cross-contamination is effectively prevented. Any loops that are not required can simply be cut off.

Specifications

Technical data

Programme STANDARD
Floor type Hard floors / Resilient floors
Floor structure Smooth and lightly structured
Dirt level Low to middle
Textile usage Reusable textiles
Working width (cm) 40
Textile attachment Pockets
Material 90% PET/10% PA
Textile material microfibre
Manufacturing type Pile knitted fabric (Cleaning layer)
Textile structure Loop pile
Washing temperature (°C) max. 90
Washing recommendation (°C) 60
Dryer temperature (°C) max. 60
Wash cycles* approx. 300
Quantity (piece(s)) 1
Packaging unit (piece(s)) 25
Weight per product / Weight per m² (g/g/m²) 75 / 440
Dimensions (L × W) (mm) 460 x 145

*Compliance with or use of recommended temperatures and detergents. In addition, the use of a dryer, especially at higher temperatures, may reduce the life considerably.

Videos
Application areas
  • Floor - wet cleaning
  • Floor washroom - wet cleaning