Red abrasive short-fibre microfibre hook-and-loop mop, 60 cm

Abrasive short-fibre microfibre hook-and-loop mop with hook-and-loop fastening for removing heavy dirt on smooth and structured hard floors. Suitable for preconditioning or spray method.

The red abrasive microfibre hook-and-loop mop is ideal for efficient use on smooth and lightly structured hard floors in sanitary facilities with high level of dirt. It has a handy hook-and-loop fastening so that it can be easily attached to and removed from the mop holder. The abrasive mop also comprises fine microfibres with polyamide fibres and robust polypropylene bristles. These gently but effectively detach stubborn dirt. The wide edges at the sides of the microfibre mop reliably remove loose dirt from nooks and corners. The colour coding means it can be clearly assigned to the corresponding area to be cleaned, thus preventing cross-contamination. Well-balanced sliding properties assist cleaning personnel with the work and reduce cleaning effort. The 60 centimetre wide mop cover can be used both for the spray method and for preconditioned applications. 

Specifications

Technical data

Programme ADVANCED
Floor type Hard floors / Resilient floors
Floor structure Smooth and lightly structured
Dirt level High
Textile usage Reusable textiles
Working width (cm) 60
Textile attachment Hook&Loop
Material 56% PET / 14% PA / 30% PP
Textile material microfibre
Manufacturing type Pile knitted fabric (Cleaning layer)
Textile structure Loop pile
Washing temperature (°C) max. 90
Washing recommendation (°C) 60
Dryer temperature (°C) max. 60
Wash cycles* approx. 250
Quantity (piece(s)) 1
Packaging unit (piece(s)) 25
Weight per product / Weight per m² (g/g/m²) 148 / 730
Dimensions (L × W) (cm) 63 x 14

*Compliance with or use of recommended temperatures and detergents. In addition, the use of a dryer, especially at higher temperatures, may reduce the life considerably.

Application areas
  • Floor washroom - wet cleaning
Cleaning agents