Red short-fibre microfibre hook-and-loop mop, 40 cm

Short-fibre microfibre hook-and-loop mop with hook-and-loop fastening for single-stage wiping on smooth and lightly structured hard floors. Suitable for the spray method and preconditioned applications.

The red microfibre hook-and-loop mop was specially developed for cleaning applications in sanitary facilities. It is made of high-quality materials and has a handy hook-and-loop fastening for simple attachment to and removal from the mop holder. Thanks to its short-fibre structure, the mop is ideal for cleaning smooth and lightly structured hard floors. The fine microfibres of the hook-and-loop mop not only offer well-balanced, effortless sliding properties, but also outstanding absorption of moisture and thus also dirt and dust. The wider edges at the sides of the short-fibre mop reliably remove loose dirt from nooks and corners. The colour coding means it can be clearly assigned to the corresponding area to be cleaned, thus preventing cross-contamination. The 40 centimetre wide mop cover can be used both for the spray method and for preconditioned applications.

Specifications

Technical data

Programme ADVANCED
Floor type Hard floors / Resilient floors
Floor structure Smooth and lightly structured
Dirt level Low to middle
Textile usage Reusable textiles
Working width (cm) 40
Textile attachment Hook&Loop
Material 90% PET/10% PA
Textile material microfibre
Manufacturing type Pile knitted fabric (Cleaning layer)
Textile structure Loop pile
Washing temperature (°C) max. 90
Washing recommendation (°C) 60
Dryer temperature (°C) max. 60
Wash cycles* approx. 250
Quantity (piece(s)) 1
Packaging unit (piece(s)) 25
Weight per product / Weight per m² (g/g/m²) 82 / 440
Dimensions (L × W) (cm) 46 x 14

*Compliance with or use of recommended temperatures and detergents. In addition, the use of a dryer, especially at higher temperatures, may reduce the life considerably.

Videos
Application areas
  • Floor washroom - wet cleaning
Cleaning agents