Safety vacuum system NT 80/1 B1 M S
The NT 80/1 B1 MS safety vacuum cleaner is a powerful, single-motor wet and dry vacuum cleaner. It is fully equipped with electroconductive accessories for professional use. As a result it is ideal for vacuuming propelling charge residue in shooting ranges of gun clubs, the police force and military - as well as in the gunpowder-processing business & industry. The suction waste is pulled through a water bath (with water level control) and loses its dangerous, explosive effect in the damp-wet condition.
The NT 80/1 B1 MS (IP 54 approved) is a powerful, one-engined wet/dry vacuum cleaner with an intake cartridge air filter for the turbine and a cartridge type filter and paper filter bag as a pre-filtration (both filters are approved for dust class M). It is used for vacuuming medium hazardous dusts with MAK > 0.1 mg/m³.This unit features a compact fan housing, equipped with a continuous antistatic system, a stainless steel container and with complete accessory. If maxium liquid capacity is reached during wet pick-up, a double float system will stop the air flow rate to prevent overflow. When filter or suction unit - like suction hose, tubes, floor tool - are clogged or the air flow rate is lower than 20 m/s the signal light up. On the back side of the unit a floor tool holder is integrated. Two large back wheels and two castors (electrically conductive) - one with brake - give the NT 80/1 B1 MS high mobility.
Features and benefits
- The NT 80/1 B1 M S features automatic water level control and can only be operated with a sufficient water level.
Zone 22 + dust class M
- For combustible dusts in dust explosion classes, Zone 22 and health-endangering dusts, dust class M.
|Current type (V/Hz)||220 - 240 / 50 - 60|
|Air flow (l/s)||56|
|Vacuum (mbar/kPa)||235 / 23,5|
|Container content (l)||80|
|Rated input power (W)||max. 1380|
|Standard nominal diameter||ID 40|
|Sound pressure level (dB(A))||70|
|Weight without accessories (kg)||32,5|
|Weight incl. packaging (kg)||43,9|
|Dimensions (L × W × H) (mm)||660 x 520 x 1078|
- Suction hose, 4 m, with bend (electrically conductive)
- Suction tube, 1 piece(s), 1 m, Metal
- Wet/dry floor nozzle, 370 mm
- Crevice nozzle
- Anti-static system
- Stainless steel container
- Metal bend
- Cartridge filter, Paper
- Sturdy bumper
- Push handle
- Protection class, I
- Stop swivel castor
- Dust class, M
- Container material, Stainless steel