Safety vacuum system NT 80/1 B1 M *EU
The NT 80/1 B1 M safety vacuum cleaner avoid the risk of possible dust explosions. Combustible dusts and category M hazardous dust have to be vacuumed away immediately since it is risky if they deposit. For vacuuming such dusts a B1 proofed safety vacuum cleaner like the NT 80/1 B1 M is needed (European approval of 94/9 EC (ATTEX)).
The NT 80/1 B1 M (IP 54 approved) is a powerful, one-engined wet/dry vacuum cleaner with an intake cartridge air filter for the turbine and a cartridge type filter and paper filter bag as a pre-filtration (both filters are approved for dust class M). It is used for vacuuming medium hazardous dusts with MAK > 0.1 mg/m³. This unit features a compact fan housing, equipped with a continuous antistatic system, a stainless steel container and with complete accessory. If maxium liquid capacity is reached during wet pick-up, a double float system will stop the air flow rate to prevent overflow. When filter or suction unit - like suction hose, tubes, floor tool - are clogged or the air flow rate is lower than 20 m/s the signal lamp light up. On the back side of the unit a floor tool holder is integrated. Two large back wheels and two castors (electrically conductive) - one with brake - give the NT 80/1 B1 M high mobility.
Features and benefits
- The NT 80/1 B1 M S features automatic water level control and can only be operated with a sufficient water level.
Zone 22 + dust class M
- For combustible dusts in dust explosion classes, Zone 22 and health-endangering dusts, dust class M.
|Air flow rate (l/s)||56|
|Vacuum (mbar/kPa)||235 / 23,5|
|Container capacity (l)||80|
|Max. rated input power (W)||max. 1380|
|Standard nominal width||40|
|Cable length (m)||10|
|Sound pressure level (dB(A))||70|
|Frequency (Hz)||50 - 60|
|Voltage (V)||220 - 240|
|Dimensions (L × W × H) (mm)||660 x 520 x 1078|
- Suction hose, 4 m
- Filter bag, Paper
- Wet and dry floor nozzle, 360 mm
- Crevice nozzle
- Antistatic preparation
- Stainless steel container
- Cartridge filter, Paper
- Sturdy bumper
- Push handle
- Protection class, I
- Steering roller stop
- Dust class, M