Water blasters HD 13/18-4 S Plus
The HD 13/18-4 S Plus cold water blaster in an upright construction style impresses with EASY!Force high-pressure gun, pressure switch control and Servo Control.
The HD 13/18-4 S Plus cold water blaster with three-phase drive offers a high level of convenience and the impressive power of 180 bar with a maximum flow volume of 1,300 l/h. Due to the upright construction style, the machine requires less space than conventional machines and is easier to manoeuvre, particularly around obstacles. This is also helped by the large, rubber-tyred wheels, which make the machine easy to transport, even on rough terrain. Accessories that are not being used can be stored in the separate nozzle compartment so that they do not get lost. New innovations guarantee effortless operation and time-saving set-up and dismantling: While the EASY!Force high-pressure gun makes use of the recoil force of the high-pressure jet to reduce the holding force to zero, the EASY!Lock quick-release fasteners make handling five times faster than with conventional screw connections, without losing any robustness or longevity. The machine has been designed for daily use in harsh conditions. The cleaning agent-resistant brass cylinder head and stainless steel pistons with ceramic sleeves ensure a long service life.
Features and benefits
Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks.At last – work without getting tired: the EASY!Force high-pressure gun. EASY!Lock quick-release locks: durable and robust. And five times faster than screws.
Proven Kärcher qualityFour-pole, water-cooled electro motor. Robust brass cylinder head and ceramic piston. Reinforced, break-resistant plastic chassis.
For increased safetyIntegrated electronics system for machine monitoring. Switch-off in the case of overvoltage or low voltage range. Switch-off in the case of leaks or phase failure.
|Current type (Ph/V/Hz)||3 / 400 / 50|
|Flow rate (l/h)||650 - 1300|
|Working pressure (bar/MPa)||30 - 180 / 3 - 18|
|Max. pressure (bar/MPa)||198 / 19.8|
|Connected load (kW)||9.2|
|Dimensions (L x W x H) (mm)||560 x 500 x 1090|
- Spray gun, EASY!Force Advanced
- Spray gun with soft grip
- High-pressure hose, 10 m
- Spray lance, 1050 mm
- Power nozzle
- Dirt blaster
- 4-pole three-phase motor with air and water cooling
- Pressure switch-off
- Integrated water fine filter
- Electronic motor protection system with LED display
- Oil sight glass
- Bypass cleaning agent injector
- Servo control
- Brass water inlet fitting