High pressure washer HD 10/25-4 S
Upright cold water pressure washer. Servopress for adjustment of pressure and water flow rate directly on the trigger gun, pressure switch control, Easy-Press trigger gun with soft grip surface, pivoting stainless steel spray lance, detergent tank, separate compartment for nozzles.
The three-phase HD 10/25-4 S cold water pressure washer is user friendly and offers an operating pressure of 250 bar at a maximum throughput rate of 1000 l/h. Thanks to its upright construction, the HD 10/25-4 S takes up less space than a conventional machine and is much easier to manoeuvre, especially up and down steps and stairs. Its large diameter, rubber-tyred wheels ensure maximum mobility even in difficult terrain. The push handle adjusts to the most comfortable height for the user. Accessories that are not in use can be kept safely in a separate nozzle compartment. The easy-press trigger gun offers a high degree of user comfort since it requires less effort to hold and operate and features a servopress controller for convenient adjustment of pressure and water flow rate. The spray lance can be pivoted through 360° while operating at full pressure. Other features are the pressure switch control, which turns off the pump as soon as the trigger is released and thus extends the service life of the motor and pump, and the electronic monitoring system for the motor and pump unit. The built-in detergent tank has a capacity of 6 litres. The HD 10/25-4 S has been designed for tough daily operating conditions. The chemical-resistant brass cylinder head and ceramic pistons are combined with an efficient air-water cooling system to guarantee a long service life.
Features and benefits
Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks.At last – work without getting tired: the EASY!Force high-pressure gun. EASY!Lock quick-release locks: durable and robust. And five times faster than screws.
Proven Kärcher quality4-pole water-cooled electric motor. Robust brass cylinder head and ceramic pistons. Reinforced, unbreakable plastic chassis.
For increased safetyIntegrated electronics for unit monitoring. Automatic switch-off in case of undervoltage or overvoltage. Switches off in case of leaks or phase failure.
- Large rubber tyres for negotiating uneven surfaces, stairs and landings.
- Proven sack trolley principle for easy, ergonomic transport.
|Current type (Ph/V/Hz)||3 / 400 / 50|
|Flow rate (l/h)||500 - 1000|
|Operating pressure (bar/MPa)||30 / 250 / 3 / 25|
|Max. pressure (bar/MPa)||275 / 27.5|
|Power rating (kW)||9.2|
|Dimensions (L x W x H) (mm)||560 x 500 x 1090|
- Trigger gun, EASY!Force Advanced
- High-pressure hose, 10 m
- Spray lance, 1050 mm
- Power nozzle
- 4-pole three-phase motor with air and water cooling
- Pressure switch control
- Integrated fine mesh water filter
- Electronic motor protection system with LED display
- Oil sight glass
- Servo Control
- Brass water inlet fitting