The SGV 8/5 Classic steam cleaner operates with a steam pressure of 8 bar, a hot water temperature of approximately 70 °C, and a 3-stage steam volume control. Dirt is loosened solely through the physical action of the steam and mechanical brushing. The loosened dirt is vacuumed up along with the condensate. The reliable cleaning performance is confirmed by independent certifications. Operation is straightforward via the EASY-Operation rotary switch, which controls the 3 steam/vacuum operating modes. Steam volume, rinsing mode, and vacuum function can be adjusted directly during operation using the ergonomic steam/vacuum gun. An LED color indicator continuously displays the operating status and any malfunctions. The accessories are stored directly on the unit, protected from dirt, and are always readily accessible.
Sustainable and outstanding cleaning performance
Ultra-high steam pressure (8 bar), hot water temperature approx. 70 °C and excellent suction power. Removes even stubborn dirt without cleaning agents. Designed for continuous workflows in commercial and industrial operations.
EASY Operation rotary switch with three operating modes
Particularly user-friendly thanks to self-explanatory symbols. No need for time-consuming induction. On/off switch and steam cleaning/wet vacuum cleaning. Cold water rinsing: Pre-rinse heavily soiled surfaces with cold water.
Steam/suction hose with steam/suction gun
Particularly user-friendly rotary and pressure switch for controlling various functions. Offers three-stage steam flow control, cold and hot water operation, and simultaneous vacuuming. Time-saving: Mode can be adjusted during operation. No need to interrupt the cleaning process.
Operating status shown on LED display
Indicator light for "Ready for operation" and "Heating on" for applying hot water. Indicator light for "Fresh water tank empty" or "Dirty water tank full". Indicator light for "Service" or "Fault".
Three-stage steam flow control
Light steam (level I) for low soiling. Medium steam (level II) for average soiling. Strong steam (level III) for stubborn soiling.
Integrated accessory storage
Accessories such as nozzles or round brushes are always to hand. All accessories are kept clean and secure during transportation. The power cable is safely stored on the rear of unit for transportation.
Extensive range of accessories included in the scope of delivery
300 mm floor nozzle with brush strips and squeegee insert. 150 mm hand nozzle with brush strips and squeegee insert. Crevice nozzle, point jet nozzle and three different round brushes.
Ergonomic and easy to transport
When loading the machine, hold it by the recessed handles and the push handle. When transporting over longer distances, pull the machine along behind you by the push handle. Large transport rolls make it easy to transport even up or down steps.
