Hot water high-pressure cleaner for cleaning and disinfecting large surfaces

The intensive and meticulous cleaning with high pressure cleaners offers the possibility to achieve a high standard of hygiene. They can be used to reach places that are difficult to access manually, such as crevices and cracks. They are especially helpful when cleaning and disinfecting large surfaces such as ceilings, walls and floors and can effectively combat germs, bacteria and viruses.

Cleaning with Kärcher hot water high-pressure cleaner
Cleaning with Kärcher hot water high-pressure cleaner

Hot water high-pressure cleaner

The use of hot water high-pressure cleaners speeds up cleaning by up to 40 percent compared to cold-water units, especially due to the faster drying process of the clean surfaces. In addition to better results and a faster cleaning and drying time, a measurable reduction of germs can be achieved when using hot water high-pressure cleaners and a water temperature of at least 85°C. Not only dirt, but also bacteria and viruses can be effectively fought. With the help of the steam stage it is even possible to clean at temperatures of up to 155°C. 

Depending on the area of application, high-pressure cleaners are required in which the water pressure and quantity can be regulated at the high-pressure gun. This makes it possible to work with the appropriate combination in each case without the dirt splashing back and coming towards the user.


Using cleaning agents to interrupt infection chains

When cleaning with high-pressure cleaners, suitable cleaning agents should also be applied with the cup foam lance to interrupt infection chains and remove all dirt residues. An advantage of cleaning foam: It is so stable that it adheres to surfaces and increases the time and cleaning effect. The subsequent rinsing with water helps to remove the dirt in a controlled manner and to prevent renewed contamination. Biodegradable cleaning agents can also support the process. A change of acidic and alkaline foam cleaning products is also necessary to reliably remove the basis of life from microorganisms.

Use of cleaning agents with Kärcher hot water high-pressure cleaners

Cleaning with Kärcher hot water high-pressure cleaner

After cleaning with high pressure

After meticulous cleaning with high-pressure cleaners, a subsequent disinfection rounds off the cleaning process (see instructions for disinfection with high-pressure cleaners): Soak, clean, allow to dry and finally disinfect surfaces.

To remove dirt and residual water, a wet and dry vacuum cleaner can effectively support the work of the high-pressure cleaner.


INFORMATION


Contact us

Kärcher Tunisia
lmmeuble Yasmine Tower
Bloc A 6ème étage, bureau A 6.6
Centre Urbain Nord
1082 Tunis - Tunisia


E-Mail: info@tn.kaercher.com

SSL Secured
© 2024 Kärcher Tunisia