PROFESSIONAL WATER DISPENSERS WITH SYSTEM.
Fresh drinking water for offices, hospitals, authorities and industry. Kärcher WPD water dispensers with innovative filter systems, patented thermal disinfection and intuitive operation ensure that employees as well as customers and visitors are always safely supplied with fresh drinking water.
fresh water
Unfortunately, clean and drinkable tap water is not a given in many regions. Our compact water treatment systems WPC 120 UF, WPC 100 RO and WPC 80 RO are a remedy for this and, using the principle of reverse osmosis, provides pure drinking water wherever it is needed. In doing so, it produces around 70% less waste water than comparable competitor products.
KÄRCHER THERMO!SECURE:
AUTOMATIC DISINFECTION WITHOUT CHEMICALS.
With Kärcher Thermo!Secure, the WPD devices in the Thermo!Secure range include a hygiene feature that sets new standards. The system automatically cleans and disinfects not only all water-carrying lines with hot water, but also the Hy-Protect filter up to the water dispensing area. The interval can be set manually, from weekly cleaning and disinfection to a four-week cycle.
The patented method does not use any chemicals and functions without any need for manual input. For drinking water in food-grade quality. Also in sensitive areas such as hospitals, authorities and food processing.
Step 1: heating and preparing the circuit
The drinking water is heated to over 70 °C in the internal boiler. An integrated pump allows the hot water to circulate in the disinfection cycle until the first water line and the Hy-Protect filter have reached the target temperature.
Step 2: all water circuits are thermally cleaned one after the other
Once the target temperature has been reached, the various lines are systematically switched on. The output valve is also flushed so that thermal disinfection reaches as far as the water dispenser and thus the last millimetre.
Step 3: flushing and restarting
After around 60 minutes, all water-carrying components will have been thermally disinfected. The hot water used is automatically flushed into a canister or directly into the wastewater connection. Then the device is ready for operation again.
ACTIVE-PURE AND HY-PROTECT FILTERS: DOUBLE FILTERING FOR A BETTER TASTE.
Kärcher water dispensers are equipped with 2-stage filter systems which ensure pure water quality. Thanks to the combination of Active-Pure filter and Hy-Protect filter the water is thoroughly cleaned – chemicals and microorganisms are removed, and the taste is improved.
Active-Pure filter – for better taste and chemical purity
The Active-Pure filter contains a sintered active carbon block and targets undesired residues affecting taste or health. It makes a noticeable improvement to the taste of the water and reliably reduces chlorine, heavy metals, drug residues, hormones and other organic contamination.
Hy-Protect filter – for microbiological safety
The system is complemented by the Hy-Protect filter with ultrafiltration technology. The fine-pored membrane reliably removes microplastics, bacteria and viruses from the water – without affecting important minerals.
Hy-Pure-Plus filter – compact performance in the WPD 25
With the Kärcher WPD 25, the combined filter technology is used in a single unit: the Hy-Pure-Plus filter combines the functions of Active-Pure and Hy-Protect in a compact module. This way smaller sites or space-critical applications also benefit from the full filter capacity.
