Cleaning and maintaining ceramic tiles

Cleaning and maintaining ceramic tiles – how does it work? They are fired at a temperature of 1000 to 1400 °C and made of inorganic materials. Terracotta, clinker brick, fine stone, earthenware and stoneware are widely used nowadays. Although there are many different variations, the cleaning steps are always similar. Only a few types of tile require maintenance.

Cleaning ceramic tiles

Know what you are dealing with: A brief introduction to the materials science of ceramics

Walls and floors are made with many different appearances and materials. There is natural stone, such as marble or granite, as well as cement-bound artificial stone, such as terrazzo or agglo marble. Where ceramic tiles are used, a distinction is made between five different types of surface:

  • Terracotta: Red and warm in colour, coarse in texture, rather rustic in appearance
  • Clinker: Red or yellow colouring, popular for workshop floors or external walls; glazed or unglazed
  • Fine stone: Mostly solid-coloured, printed or polished, microporous surface
  • Earthenware: Softer, less mechanically resilient, suitable for walls, glazed
  • Stoneware: Glazed or unglazed; unglazed version with a rough surface is often laid in kitchens with studs (raised pattern structure) to minimise risk of slipping

What the R class is all about: Anti-slip tiles

If tiles are laid on floors, an anti-slip class of at least R9 is required in commercial areas. In areas where slip hazards play a major role, for example in meat processing, the highest R class, R13, is a must. The German Social Accident Insurance 108-003 specifies which anti-slip class is required in which work area. Highly textured tiles also have areas between the studs, so that water can run off and does not create a slipping hazard. However, dirt accumulates particularly well on them, and cleaning is time-consuming.

Tile anti-slip

Ceramic tiles: Maintenance cleaning and deep cleaning

The vital element: Maintenance cleaning of ceramic tiles


If you want to clean ceramic tiles, regular maintenance cleaning is the vital element. Cleaning is carried out dry and/or wet, depending on the degree of soiling. Loose dirt can be removed with a vacuum cleaner or by means of dust-binding wiping with a microfibre material, which becomes electrostatically charged. Afterwards, work can be done manually with a large surface wiping machine, microfibre wiping cloth and a suitable cleaning agent.

Scrubber driers for large areas

For large areas, scrubber driers are usually used – in this case, loose, fine dirt does not need to be removed in advance. To achieve the desired cleaning result, choosing the right brushes or pads for the machines is key. Ceramic tiles with a coarse texture scrub up especially well with the use of very deep roller brushes, while ceramic tiles such as fine stone with a finer texture require microfibre rollers. 

The right suction lips should also be used to vacuum the dirty water. Closed suction lips are recommended for textured surfaces and slotted suction lips for glossy surfaces. For stubborn dirt on fine stone (greying), melamine resin pads are recommended in combination with wheel scrubbing heads.

Tip: Walls can also be cleaned with a large surface wiping machine and telescopic pole, which enables you to achieve good results quickly and efficiently.

Scrubber driers for large areas
Deep cleaning of ceramic tiles

It's that time again: Deep cleaning ceramic tiles

Single-disc machines or scrubber driers are used to deep clean ceramic tiles on floors. More highly concentrated cleaning agents (acidic as well as alkaline) can help to achieve a good result rapidly.

Surface cleaners for special cases

Surface cleaners for special cases

For textured ceramic tiles or confined spaces, a high-pressure cleaner with a surface cleaner may be useful. The surface cleaner consists of a rotating nozzle bar under a hood, to which power nozzles are attached in a slightly offset position. They feed the water to the surface at high pressure and loosen the dirt very effectively.

Cup foam lances for longer contact time

Cup foam lances for longer contact time

For large wall surfaces, floors or sanitary facilities, high-pressure cleaners with cup foam lances are the technology of choice. With the aid of the foam cleaning agent and air, which is added at the nozzle, they generate foam with the high-pressure jet. The great thing about this system is that you can see where the cleaning agent has been applied, and the foam stays in place for longer than a normal cleaning agent, thereby increasing the contact time.

Tip 1: Never direct the high-pressure jet directly at the joints to avoid damage.
Tip 2: If the cleaning agent used is acidic, cement-based tile joints must be rinsed with water before use to ensure that absorbed acid does not cause any damage.

Steam cleaners for tiled walls

Steam cleaner for tiled walls

To deep clean ceramic tiles on walls, a steam cleaner may also be suitable, depending on the available space. The steam emerges from the nozzle in very fine drops at a temperature of 100 °C, a pressure of up to 8 bar and at a speed of around 170 km/h. A combination of lint-free terry cloths and a large floor nozzle enables effective cleaning over larger areas. 

Particle spray processes for outside areas

The low-pressure particle spray process is a gentle, efficient method for the earthenware surfaces in outside areas heavily affected by mineral soiling, after pre-cleaning with the high-pressure cleaner. Here, a jet gun is supplied with compressed air via an industrial compressor. In addition, a very fine, soft spray agent and water are added to the air in the mixing chamber for dust-binding work. The mixture of air, water and spray agent then emerges at the nozzle of the spray gun, whereby the air pressure, water quantity and spray agent volume can be regulated. 

Cleaning agents for ceramic tiles

Ceramic tiles can be cleaned with acidic and alkaline cleaning agents. Acidic cleaning agents help against mineral dirt such as limescale, urine deposits or rust; alkaline cleaning agents are ideal for removing organic dirt such as grease, protein or oils.

In some ceramic tiles, such as terracotta, the colour tone is created by metal oxide. Therefore, when using acidic cleaning agents, make sure that they do not contain phosphoric or hydrochloric acid, since the derusting effect of these may lead to changes in colour. 

In general, ceramic tiles are also resistant to alkaline cleaning agents, but the cleaning agent should not contain sodium silicates. These may have a structure-changing effect and make surfaces rougher or smoother.


Is maintaining ceramic tiles a must? When oiling and other methods are useful

Surfaces are maintained to make them more hard-wearing against mechanical stress, to protect pores from water penetration or to improve their appearance. Ceramic tiles do not need to be protected from mechanical stress due to their hardness. 

Tiles with high water absorption

Terracotta and unglazed earthenware tiles are floor coverings that can have high water absorption. If such floors are oiled, the oil penetrates into the pores and protects the ceramic tile from moisture. If you additionally want to achieve a rustic look with terracotta, you can use what is known as buffalo stain, a wax-oil mixture that contains carbon black. The carbon black settles in the structure, creating a pre-loved appearance. Depending on the type of tile, you may want to increase the level of shine, which can be achieved by using a wipe care based on water-soluble polymers.

Tiles with low water absorption

However, impregnation is not worthwhile for a floor covering such as fine stone, since these types of floor coverings have a low water absorption. This means that moisture cannot penetrate, the impregnation remains on the surface and runs off quickly. If the fine stone has been coated in one of the previous cleaning processes, the coating should be removed with a universal deep cleaner, as otherwise an unattractive film will develop over time.

Tip: The care agent should not be applied directly to the ceramic tiles, but should be applied with a cleaning textile in order to ensure even distribution.

FAQs

Combatting microorganisms

Bacteria and fungi, etc. like to spread in swimming pools, sauna and wellness areas or commercial kitchens – if you let them. By alternately using acidic and alkaline cleaning agents, you remove soiling, which is the basis of life for these microorganisms. This prevents them spreading. 

The only thing to be aware of is that if you have joints in the floor that contain cement, these must be rinsed with water before using an acidic detergent. This means they are saturated with water first and are therefore protected from damage.

Joints may contain cement, pure epoxy resin or a mixture of these two materials. Steam cleaners remove dirt and deposits effectively and quickly from wall and floor joints. If joints in floors need cleaning, machines with roller technology or oscillating machines are recommended. When using an acidic cleaning agent, only joints containing cement need to be rinsed with water beforehand.

When cleaning floors with a classified anti-slip rating, do not use a cleaning agent or pad containing abrasive particles, as this may reduce its anti-slip capabilities. 

If a floor is too smooth, it is important to determine why this has happened – often, it is due to cleaning errors which can be corrected. Possible reasons may also include cleaning not being performed often enough, as loose dirt such as sand or other fine particles can act like ball bearings. 

If the tile surface has become too slippery, it can be treated with hydrofluoric acid. Hydrofluoric acid attacks the material and roughens it, meaning the R class of the tile increases again. However, this work should be performed by experts.

Strange but true: When gypsum forms on ceramic tiles

Here's a tip for cleaning floors with ceramic tiles: Turn off the underfloor heating before starting the cleaning tasks. This prevents the cleaning agent from drying too quickly on the surface. In addition, some acids have a tendency to convert lime into gypsum over a long contact time. This process accelerates with the added warmth of underfloor heating. The resulting gypsum deposits are difficult to remove mechanically – so it's better to turn off the heating.

Suitable products for your area of application

CONTACT

Kärcher Cleaning System Pvt. Ltd.
A-42/4, Sector-62, Noida - 201 309,
Uttar Pradesh

For Sales Query: info.in@kaercher.com
For Service Query: service.in@kaercher.com

Toll Free Customer Care No. 1800 1234 180
Working Hours: 09:00 hrs – 18:00 hrs (Mon-Sat)
(Closed on Sunday & Public Holidays)

SOCIAL MEDIA
CO₂-NEUTRAL WEBSITE