Truckwash RBS 6014
The ideal cleaning solution for a quick and gentle manual outer cleaning of commercial vehicles. The RBS is best suited for small fleets with buses, trucks, trucks with trailers or semitrailer trucks. With the machine vehicles with up to 4.20 m in height can be washed.
The RBS 6000 is a manually-operated single brush machine for commercial vehicles. It has been designed and developed based on Kärcher’s expertise in vehicle washing technology. The emphasis has been put on the gentle removal of traffic film by rotating washing rollers. The machine is the ideal solution for the quick and thorough all-round cleaning (sides, front and rear) of small fleets. In every washing process where water and detergents are used during the wash cycle, an aggressive environment is created. For this reason, Kärcher puts special emphasis on optimum protection against abrasion and rust of the plant components. Therefore the frame is an aluminium-welded construction. The compact construction on a rigid 6-guide-roller chassis guarantees high stability. The RBS 6000 is easily moveable with the help of 4 caster wheels (2 of them fixable). Two additional wheels ensure a excellent stableness and track reliability during the washing process. The forward movement along the vehicle is supported by the brush rotation. The plant combines - as a result of ideas of industrial designers - a clean appearance with high operating safety and optimal handling. The renowned German test-certificate "GS-Gütesiegel" proves this. The brushes (right and left movement) are controlled by deadman switches on both sides. Water supply can be stopped by a sliding cock. Detergent is mixed to water by means of a dosing pump. Plastic covered handles, a chassis frame with rounded edges and distance rollers protect the operator and the vehicle. The double-supported brush shaft is driven by a geared motor with a self-tightening chain drive. The white-yellow coloured brush (diameter in operation approximately 1,000mm) consists of profiled polyethylene bristles and those are gathered on individually exchangeable half shells.
Features and benefits
|Operation and safety handling||
|Height of system (mm)||4370|
|Washing height (mm)||4205|
|Number of current phases (Ph)||3|
- plant control cabinet
- Number of wash brushes, 1 piece(s)
- PE-brushes, standard Kärcher design
- wheels standard height