Office cleaning

Office cleaning takes place in a challenging environment where several different priorities come into conflict: Time and cost factors, cleaning results, hygiene and sustainability are all interconnected and must be taken into account. Accordingly, it is important to select suitable cleaning methods for the challenge in question. Particularly with a view to ensuring hygiene and sustainability, static cleaning will increasingly be replaced by dynamic cleaning in the future.

Office cleaning

Steps towards a clean office

Offices are places where many people congregate for hours every day. The equipment, nature and use of office spaces therefore present a range of specific challenges for cleaning service providers. Factors such as time and cost must be taken into account, while ensuring cleanliness, hygiene and, increasingly, sustainability are guaranteed. Here, it is worth having an overview of common applications and suitable solutions, including having a sensible structure for cleaning sequences, as well as being aware of current developments in cleaning technology.

The right preparation

Preparation and follow-up are essential parts of the cleaning sequence for a room – in addition to the cleaning task itself.
In all cases, this includes personal protective gear, knowledge of safety instructions and hygiene rules, and the provision of materials and equipment. Provision of materials is important because it is only the cleaning task in the room with the respective defined method variants that is the deciding factor in which equipment is required. In offices, coarse dirt should be collected and waste disposed of first.

Principles of cleaning

  • Clean from top to bottom
  • Clean from back to front
  • Clean from dry to wet
  • Clean from clean to dirty


Manual cleaning in the office

Cleaning surfaces ensures that rooms have an attractive appearance, contributes to preservation of value and plays a major role in the prevention of contact infections. A cleaning method particularly suited to removing loose or partially stuck dirt from desks, sideboards or cable ducts is wiping with a damp cloth and spray. This method saves time, cleaning agent and water, while achieving an excellent level of hygiene at the same time. Either the cleaning agent is pre-dosed, thus preventing uneconomical and environmentally unfriendly overdosing. Alternatively, the cleaning agent can be sprayed directly onto the cloth – three sprays is sufficient here – and the moistened side is then used to clean. If stubborn dirt must be removed, the method of wet wiping with a preconditioned cloth is used.

Starting at the edge of the surface, the cloth is moved back and forth in an arc to the opposite side to pick up dirt that is loose and partially stuck. Vertical surfaces are cleaned from top to bottom, where the cloth is also moved in wide arcs. The cloth can be folded up to three times, so that 16 sides are created and each surface can be cleaned with a fresh side. An alternative is to fold the cloth twice and use the eight resulting sides. In both instances, after every side of the cloth has been used, it is discarded and replaced with a fresh cloth. Users should always be vigilant about personal protective gear and wear protective gloves appropriate for the application and cleaning agent used. The spectrum ranges from disposable gloves to protective gloves.

Surfaces where loose dirt has settled can be cleaned with dust-binding cloths. Adhesive-impregnated variants have proven successful, as the surfaces are efficiently cleaned of dust without water or cleaning chemicals. If surfaces are cleaned regularly, a dust-binding cloth can be used for more than one room. In addition, these cloths are suitable for wiping and collecting dust on smooth floor coverings. Gloves do not necessarily have to be worn for dust-binding cleaning.

Touchpoint treatment

Treating critical points of contact

Frequently used surfaces are treated in what is known as critical touchpoint treatment, i.e. cleaning or disinfecting critical points of contact. If contaminated surfaces are to be chemically disinfected, disinfectant cleaners and disinfectants are available, which, depending on the version, can have a virucidal effect against enveloped viruses.

Touchpoints and steam

Depending on the type of dirt and nature of the material, and thanks to their high cleaning temperature, steam cleaners and steam vacuum cleaners are an effective and time-saving solution in ensuring an appropriate level of hygiene and combating germs and viruses. The steam emerges in very fine drops and, depending on the machine type, at a temperature of around 100 °C and a pressure of up to 8 bar. It is possible to clean steam-resistant walls, floors and furniture effectively, since the steam also reaches areas that are difficult to access.


Dry vacuum cleaners in the office

Textile floor coverings

Offices usually have textile floor coverings. For a good cleaning result, it is recommended to vacuum rooms from the entrance, starting from the edge and always moving the nozzle backwards and forwards diagonally in a V-pattern over areas that are yet to be cleaned. Using a crevice nozzle is recommended for narrow sections.

As there are lots of people present during the day, the use of battery-powered vacuum cleaners has proven to be appropriate. You benefit from several advantages over classic models: There are no tripping hazards caused by cords which have to be signposted, and repair costs for damaged cords are completely eliminated. As work can be carried out completely freely and without having to look for a suitable power socket, around 20 per cent of the work time can be saved. Uncomplicated battery replacement for various machines is possible if a uniform platform with the same battery and charging technology is used. Corded or battery-powered vacuum cleaners with an eco function make a contribution towards sustainable cleaning, since they provide good suction power despite reduced energy requirements, thanks to efficient motors and optimised flow technology.

While handheld cordless vacuum cleaners and electric sweeping brushes make spot cleaning tasks easier, upright brush-type vacuum cleaners or battery-powered push vacuum sweepers are recommended for cleaning large hallways with textile floor coverings. It is important to be aware of optimal vacuuming paths, which differ from the procedure with a vacuum cleaner: First, all edge areas are cleaned, then the remaining area is cleaned in squares with straight, parallel strokes. It is important that the machines are equipped with a carpet sweeping kit. This includes an adjustable, antistatic main sweeper roller and a fluff filter for the filter.

Stains in the carpet are removed in the course of maintenance cleaning with a suitable stain-removing detergent. If pathways in the carpet can be seen, it's time for intermediate carpet cleaning.

Scrubber drier in the office environment

Cleaning hard floors in the office

Where there are hard floors, such as in corridors or tea kitchens, scrubber driers are the right choice, as they can be used more efficiently and hygienically than traditional wet wiping. The improved cleaning performance is complemented by the immediate pick-up of dirty water, which significantly reduces the risk of slipping. If the machine has a rotatable and steerable scrubber head, it is easy to manoeuvre, so the user can navigate around any obstacles without problem. If hard flooring is laid in an office, a compact scrubber dryer that can also clean under desks is ideal.

When using scrubber driers, parameters such as suction power or water volume should be adjustable to suit the respective use and degree of dirt in order to clean whilst ensuring economical use of resources. Incidentally, battery-powered machines reduce the effort required, because when the machine performance is adjusted to the application, a larger surface area can be cleaned without interruptions to charge or change the battery. The best possible way to clean the area is in straight strokes from outside inwards. For hard-to-reach areas and corners, preparatory manual cleaning with some wet wiping is recommended.

Deep cleaning and restoring protective coatings on hard floors

Often, resilient floor coverings are laid that have a polymer dispersion coating. These coverings wear out over time, showing scratches in which dirt can collect. Cleaning becomes more difficult and time-consuming. Restoring protective coatings is therefore sensible at certain intervals. There are two ways of doing this: Restoring protective coatings and deep cleaning.

Office floor covering coating

Restoring a protective coating is an intermediate cleaning stage, using dry scrubbing and cleaning (spray method).
In this way, signs of light use and scratches are sanded and the slightly worn protective coating is replaced in these areas that are subjected to particularly heavy stress. Towards the edge, the protective coating is realigned with the existing coating.

The following cleaning system is used for deep cleaning:
The methods of wet scrubbing, wet vacuum cleaning and wet wiping, as well as coating.
In contrast to restoring protective coatings, deep cleaning removes all old protective coatings/other coatings from the floor, so that at the end the bare floor is retreated with two to three coatings.

Restoring a protective coating is no replacement for classic deep cleaning – however, it does delay deep cleaning, which itself can be very costly. In the past, for example, deep cleaning was usually carried out in a building once a year. In order to reduce expenditure, protective coatings were restored – a less costly procedure – twice a year instead, which roughly corresponds to the cost of one deep clean. As a result, deep cleaning no longer needs to occur annually – every two years is sufficient.

Disinfection of hard floors

Scrubber driers can generally also be used to disinfect floors. For this application, both the correct dosage of chemicals and the exact contact time in line with manufacturer specifications must be observed. Sucking up the dirty water also permanently removes germs. The risk of contamination is therefore minimised. The risk for the cleaning team of becoming infected via pathogens on their hands is reduced thanks to the contactless floor cleaning. Appropriate protection during preparatory and follow-up work nevertheless remains essential, as these themselves pose a risk.

A sufficient amount of the active ingredient has to reach the floor surface to successfully disinfect it. To achieve this, the flow volume should be selected in relation to the floor covering such that even wetting can be ensured. Microfibre textiles or pad materials are a helpful tool – brushes are less suitable. In order to comply with the required contact time, work must be performed without suction. The disinfectant solution is only applied to the floor with the scrubber drier. The area is then allowed to dry.

Interesting facts about stairwell cleaning

Stairs can be true design elements, made from shot-peened steel or precious wood. They can be central escape routes or merely neglected pathways between the floors. In each case, cleaning jobs on a stairwell become a challenge because the spatial conditions make the work tedious. Why is cleanliness still important? What must be kept in mind for various floor coverings? What are the most common operator errors? Here is an overview.

Saving time and resources: Sustainability and innovation

Cleaning is in itself sustainable, as it serves to retain the value and function of buildings, facilities and machines. Furthermore, with regard to building cleaning, considerations regarding sustainable and successful management often go hand in hand. After all, in order to work efficiently, it is important to reduce costs while at the same time maintaining or improving the results. This can be achieved by using power- and water-saving cleaning technology, modern procedures, or ergonomic machines that reduce physical strain and therefore also reduce time users may have to take off sick: In other words, measures which benefit the environment and humans in equal measure. The cleaning industry is currently in a state of upheaval, with traditional models and methods increasingly being replaced by dynamic, environmentally friendly approaches.

Using technology and resources sparingly

With regard to environmentally friendly cleaning concepts, cleaning agents play an important role. Environmentally hazardous substances and substances that are dangerous to health, such as phosphate or allergenic acids, must be avoided and replaced with natural substances. But it is also important that no resources are wasted on the production of such natural substances. In addition to their ingredients, cleaning performance plays a central role for ecologically certified cleaning agents. Even small amounts of a concentrate thus ought to suffice to effectively support users in their work.

Digital solutions for greater sustainability

Sustainability has a great deal to do with the use of appropriate cleaning procedures and cleaning concepts suited to the building in question. But the opportunities provided by digitalisation must not be overlooked. For example, systems available on the market facilitate needs-based building cleaning, using a combination of sensors and evaluation of data provided by artificial intelligence. Filling levels of soap dispensers and toilet paper are monitored, as is the footfall in specific building sections, such as meeting rooms. If this information is used cleverly, significant savings can be made with regard to work effort and consumable materials.

Using software or apps, which digitally represent processes for all tasks of building service contractors, adjustments to daily cleaning tasks can be made quickly and without physical contact and adopted into the cleaning plan. Real-time communication enables customers, facility managers and cleaners to exchange information quickly. Special tasks like additionally disinfecting door knobs or other surfaces can be reliably planned and communicated in this way.

Not just a clean office: Water and air

Clean air is of the utmost important in the working world, for instance in offices, public or medical facilities. In areas with large numbers of people, there is also a need for a reliable water supply. Air purifiers and piped water dispensers are a sustainable and cost-effective way to ensure a hygienic and clean environment above and beyond cleaned floors and surfaces.

Office air purifiers

For excellent air quality: Air purifiers

Office water dispensers

Cool water from the water dispenser: Cost-effective and hygienic

Suitable products for your area of application