Truckwash TB 42
The TB is a gantry wash for the automatic outer cleaning of commercial vehicles. The vehicle is positioned by the customer. Afterwards the gantry runs over the vehicle and cleans it according to the selected wash program.
Different types of commercial vehicles like trucks, truck with trailer, articulated trucks, buses or vans with our without spoiler, with or without tailgate or with different types of mirrors can be washed. The maximal wash width is 2.90 m and the maximal wash height is 5.05 m.Four steelwork heights are available. The steelwork gives the possibility to reduce the plant and wash height up to 300 mm in steps of 100 mm. Hereby the TB can be adjusted to individual conditions. The width of the TB can also be reduced up to 200 mm. The basic plant is hot-galvanised and can be powder-coated in OF 302 (RAL design card 7500) if requested. The electric cabinet is mounted on the right side and the water and media cabinet on the left side. Both high-quality plastic cabinets are easily accessible from the front. The gantries are standardly equipped with two pairs of light barriers for better contour detection and safety enhancement.
Specifications
Technical data
| Washing bay requirement (Millimetre) | 5500 x 1250 x 1720 |
| Washing height (Millimetre) | 4250 |
| Fresh water supply (volume) (Litres per minute) | 100 |
| Fresh water supply (pressure) (Bar) | 4 / 6 |
| Power consumption (Kilowatt) | 5.3 |
| Type of current (Phases/Volt/Hertz) | 3 / 400 / 50 |
| Weight without accessories (Kilogram) | 1503 |
