Microfibre mop, short fibre, abrasive, 40 cm

Abrasive microfibre mop with short fibres and flap, as well as integral polyamide fibres and robust polypropylene bristles, for removing particularly stubborn dirt.

The abrasive microfibre mop has short, fine fibres, as well as abrasive strips made of polyamide fibres and robust polypropylene bristles. It is perfect for removing stubborn dirt when deep cleaning smooth and slightly structured, water-resistant floors. Thanks to a clever flap, any skin contact by the cleaning personnel with the mop cloths during or after cleaning is avoided. In addition, the cloth has a total of 4 loops in the colours blue, red, yellow and green. With this colour-coded system the cloth can be clearly assigned to a certain part to be cleaned and cross-contamination is effectively prevented – the loops that are not required are simply cut off. The microfibre mop is perfect for use in the flat mop system with double bucket trolley or single bucket trolley and press from Kärcher.


Technical data

Programme CLASSIC
Floor type Hard floors / Resilient floors
Floor structure Smooth and lightly structured
Dirt level High
Textile usage Reusable textiles
Working width (cm) 40
Textile attachment Flaps
Material 50% PET/20% PA/30% PP
Textile material 50% PET/20% PA/30% PP
Manufacturing type PET-Woven carrier fabric with sewed-on loops
Textile structure Loop pile
Washing temperature (°C) 90
Washing recommendation (°C) 60
Dryer temperature (°C) 60
Wash cycles* approx. 300
Quantity (piece(s)) 1
Packaging unit (piece(s)) 25
Weight per product / Weight per m² (g) 120
Dimensions (L × W) (cm) 40 x 13

*Compliance with or use of recommended temperatures and detergents. In addition, the use of a dryer, especially at higher temperatures, may reduce the life considerably.

 Microfibre mop, short fibre, abrasive, 40 cm
Compatible machines
Application areas
  • Floor - wet cleaning
  • Floor washroom - wet cleaning
Cleaning agents