Abrasive short-fibre microfibre mop, light

The abrasive microfibre mop in the classic pocket version with polyamide fibres and polypropylene bristles is ideal for deep cleaning or for stubborn dirt.

The "abrasive short-fibre microfibre mop light" mop cover in the classic pocket version is especially well suited to universal applications. The mop does not have an absorbent layer and the bucket or spray-cleaning methods are therefore recommended. Thanks to its fine microfibres and the abrasive strip of incorporated polyamide fibres and robust polypropylene bristles, it can detach even stubborn dirt effectively, and the textile also has well-balanced, effortless sliding properties. In addition, the cloth has sewn corners and a total of four loops in the colours blue, red, yellow and green. Using this colour-coded system, the mop cover can be clearly assigned to a certain area to be cleaned to ensure effective prevention of cross-contamination. Any loops that are not required can simply be cut off. The microfibre mop is suitable for use with a double bucket cart, single bucket cart with press and for the spray method.

Specifications

Technical data

Programme STANDARD
Floor type Hard floors / Resilient floors
Floor structure Smooth and lightly structured
Dirt level High
Textile usage Reusable textiles
Working width (cm) 40
Textile attachment Pockets
Material 56% PET / 14% PA / 30% PP
Textile material microfibre
Manufacturing type Pile knitted fabric (Cleaning layer)
Textile structure Loop pile
Washing temperature (°C) max. 90
Washing recommendation (°C) 60
Dryer temperature (°C) max. 60
Wash cycles* approx. 300
Quantity (piece(s)) 1
Packaging unit (piece(s)) 25
Weight per product / Weight per m² (g/g/m²) 100 / 730
Dimensions (L × W) (cm) 46 x 14,5

*Compliance with or use of recommended temperatures and detergents. In addition, the use of a dryer, especially at higher temperatures, may reduce the life considerably.

Application areas
  • Floor - wet cleaning
  • Floor washroom - wet cleaning
Cleaning agents